Wholesale cold storage in mombasa, Custom cold storage in mombasa, China cold storage in mombasa

For a good cold room, to use the right way to finish the installation is very important, cause the cold storage room requires excellent sealing performance--Once the sealing performance cannot be guaranteed, It may greatly increase energy loss and spoilage of goods.

The cold storage sandwich panels—it is usually composed with 2-layer pre-painted steel sheet with polyurethane(pu)/polyisocyanurate(pir) insulated core material. As is known to all, the pu/pir is the best thermal insulation building material—so it gives the best cold storage performance with B1 fireproof at the same time.

First of all, ensuring that the quality of the cold storage composite panels is good is the top priority. Propanel, just focus on supplying the pu/pir cold room sandwich panels, give customers the best solution also best price at the same time.

Secondly, ground site preparation and inspection must be done before installation. If the foundation is uneven - the panels won't line up properly - this can cause gaps to appear, ultimately allowing cold air to escape.

Thirdly, node connections are easily handled improperly. Nodes such as column edge connections, wall corner connections, and suspended ceiling points require professional personnel to connect them according to professional instructions. Improper operation can cause cold bridge phenomenon, finally leading to energy loss and damage to the cold storage panels.

For successful international shipping, to use the correct loading method is very important, because sandwich panels need to be carefully packaged, loaded and transported--Once the loading procedure goes wrong, it may cause product damage and financial losses.

First of all, to make sure that the container condition meets transportation standards is the first step. Propanel will conduct a thorough inspection of the container before loading operations begin. If the container floor has protruding nails or sharp objects - the panel surfaces will get scratched easily - this can cause quality problem, finally leading to customer dissatisfaction.

Loading of the sandwich panels

Secondly, packaging and weight distribution calculations must be done before actual loading. It is recommended to use pallets to protect the bottom layer. Never load above the recommended height - otherwise damage may occur - ultimately resulting in the product being damaged and unable to be installed correctly.

Thirdly, security measures should be strictly done before loading. Key points such as angle brackets, protective plates, tension adjustment of straps, and filling of gaps between stacks require experienced workers to handle them according to standard operating procedures. Appropriate inflatable bags or air cushions should fill the empty space and prevent unnecessary movement of the container in rough sea conditions.